Adiflu Juntas
Anti-fungal additive for sealing mortars
Additive for sealing and filling mortars. Improves the workability of the mix and facilitates its application. Increases adhesion and water resistance. Suitable for sealing mortars and joints that require fungicidal and algicidal properties, preventing stains and the formation of mold.
Applications
- Sealing and grouting mortars for swimming pools
- Joints in kitchens, bathrooms, and floors
Features
-
01
Increases adhesion and water resistance
-
02
More plastic mortars
-
03
Prevents the formation of mold
-
04
Fungicidal and algicidal properties
Directions for use
Technical data
| Appearance | Opaque liquid | |
|---|---|---|
| Color | White | |
| Density | 1.00 ± 0.01 | |
| pH | 8 ± 1 | |
| Active substance | 7.3 % |
Safety
Do not ingest. Industrial product for professional use.
- S2 Keep out of the reach of children.
Notes
In case of accidental ingestion, call the Toxicological Information Service: 915 62 04 20.
Category Additives
Other related products
Adiflu C
Superplasticizer for mortars
Next-generation superplasticizer, plasticizing and air-entraining, substitute for lime in the preparation of mortars. Improves the workability of the mix, facilitates its placement, increases adhesion, eases demolding, and allows for a reduction in mixing water.
Adiflu 100
Plasticizer-fluidifier for cement mortars
Water-reducing plasticizer that provides mortars with better workability, plasticity, cohesion, and an improvement in the water/cement ratio.
Adiflu Gel
Antifreeze for mortars
Protects concrete that may be exposed to cold temperatures during the hours following placement. It lowers the freezing point of water and accelerates setting, compensating for the slow development of strengths at low temperatures.
Acelenet
Setting accelerator for mortars
Product created to accelerate the setting and hardening of concrete and mortar, increasing its strength even at very low temperatures. Free of corrosive substances in its composition. It is used in mass or reinforced concrete when it is necessary to shorten the setting time or maintain it at low temperatures.
Need technical advice?
Tell us about your project and we will recommend the most suitable product and dosage.