Adiflu 100
Plasticizer-fluidifier for cement mortars
Water-reducing plasticizer that provides mortars with better workability, plasticity, cohesion, and an improvement in the water/cement ratio.
Applications
- Applicable to all types of mortars
- Brickwork, masonry, renders, and plastering work
- Placement of facing bricks, stone, and terrazzo
Features
-
01
Better plasticity and adhesion
-
02
Smoother surfaces
-
03
Higher frost resistance
-
04
25% increase in impermeability
-
05
20% reduction in mixing water
Directions for use
Technical data
| Aspect | Transparent liquid | |
|---|---|---|
| Color | Amber | |
| Odor | Characteristic | |
| pH | 6 ± 1 | |
| Active substance | 26.4 % |
Composition
Surfactants, preservatives, colorants, and distilled water.
Safety
Biodegradable. Do not ingest. Industrial product for professional use.
- S2 Keep out of reach of children.
Notes
In case of accidental ingestion, call the Toxicological Information Service: 915 62 04 20.
Category Additives
Other related products
Adiflu C
Superplasticizer for mortars
Next-generation superplasticizer, plasticizing and air-entraining, substitute for lime in the preparation of mortars. Improves the workability of the mix, facilitates its placement, increases adhesion, eases demolding, and allows for a reduction in mixing water.
Adiflu Gel
Antifreeze for mortars
Protects concrete that may be exposed to cold temperatures during the hours following placement. It lowers the freezing point of water and accelerates setting, compensating for the slow development of strengths at low temperatures.
Adiflu Juntas
Anti-fungal additive for sealing mortars
Additive for sealing and filling mortars. Improves the workability of the mix and facilitates its application. Increases adhesion and water resistance. Suitable for sealing mortars and joints that require fungicidal and algicidal properties, preventing stains and the formation of mold.
Acelenet
Setting accelerator for mortars
Product created to accelerate the setting and hardening of concrete and mortar, increasing its strength even at very low temperatures. Free of corrosive substances in its composition. It is used in mass or reinforced concrete when it is necessary to shorten the setting time or maintain it at low temperatures.
Technical resources
Articles related to this product
Need technical advice?
Tell us about your project and we will recommend the most suitable product and dosage.