Adiflu C
Superplasticizer for mortars
Next-generation superplasticizer, plasticizing and air-entraining, substitute for lime in the preparation of mortars. Improves the workability of the mix, facilitates its placement, increases adhesion, eases demolding, and allows for a reduction in mixing water.
Applications
- Placement of all types of construction
- Flooring, stoneware, tiles, facing bricks, and stone
- Plasters and coatings
Features
-
01
Better workability and plasticity of the mix
-
02
Higher adhesion to the substrate
-
03
Increase in the impermeability of the mortar by 40%
-
04
Reduction of mixing water by 30%
-
05
Replaces the bag of lime in the mix
Directions for use
Safety
Do not ingest. Industrial product for professional use.
- S2 Keep out of the reach of children.
Category Additives
Other related products
Adiflu 100
Plasticizer-fluidifier for cement mortars
Water-reducing plasticizer that provides mortars with better workability, plasticity, cohesion, and an improvement in the water/cement ratio.
Adiflu Gel
Antifreeze for mortars
Protects concrete that may be exposed to cold temperatures during the hours following placement. It lowers the freezing point of water and accelerates setting, compensating for the slow development of strengths at low temperatures.
Adiflu Juntas
Anti-fungal additive for sealing mortars
Additive for sealing and filling mortars. Improves the workability of the mix and facilitates its application. Increases adhesion and water resistance. Suitable for sealing mortars and joints that require fungicidal and algicidal properties, preventing stains and the formation of mold.
Acelenet
Setting accelerator for mortars
Product created to accelerate the setting and hardening of concrete and mortar, increasing its strength even at very low temperatures. Free of corrosive substances in its composition. It is used in mass or reinforced concrete when it is necessary to shorten the setting time or maintain it at low temperatures.
Technical resources
Articles related to this product
Need technical advice?
Tell us about your project and we will recommend the most suitable product and dosage.