Resins

Epoxnet 2

Epoxy mortar in self-mixing cartridges

Epoxy mortar in self-mixing cartridges thanks to its special nozzle, designed for high-strength anchors. It is referred to as a "chemical plug" when used in hollow substrates.

Download PDF datasheet Request information

Applications

  • Joining any material, especially metal to concrete
  • Anchoring in hollow substrates (use sieves)

Features

  • 01

    High-strength anchors

  • 02

    Self-mixing cartridge: fast and precise application

  • 03

    Complies with ETAG 001-1 OPTION 7 certification

  • 04

    Total curing in 24-48 hours depending on temperature

Directions for use

Unscrew the cap and screw on the special nozzle. Place in the applicator gun for 380 cc tubes. The substrate must be firm, clean, and free of dust. Discard any non-uniform mortar. Fill the drill hole and anchor the rod. The usage time depends on the ambient temperature and the substrate. Total curing in 24–48 hours.

Technical data

Appearance Viscous paste
Odor Characteristic
Density 1.6 g/ml
Certification ETAG 001-1 OPTION 7 ETAG 001-1

Safety

Irritant. Flammable. Irritates the eyes and skin. Do not dispose of in the environment.

  • R10 Flammable.
  • R36/38 Irritates the eyes and skin.
  • S20 Do not eat or drink during use.
  • S36/37/39 Wear protective gear, goggles, and gloves.
  • S61 Do not dispose of in the environment.
  • S2 Keep out of reach of children.

Notes

In case of accidental ingestion, call the Toxicological Information Service: 915 62 04 20.

Category Resins

Other related products

View the full range

Promores 1

Bonding bridge

Acrylic resin designed for the bonding of hardened and fresh concrete, preventing them from forming two different bodies.

More information PDF disponible

Promores 5

Bonding bridge with tacking

Acrylic polymer resin in aqueous dispersion, with high adhesion and tack power. Acts as a bonding bridge or primer layer to facilitate the subsequent adhesion of mortar or plaster to different substrates.

More information PDF disponible

Epoxnet

High resistance two-component epoxy resin

Two-component epoxy resin specifically designed for use in construction. Its high resistances make it indispensable in any repair and bonding work.

More information PDF disponible

Floor Sealer

Solvent-based sealing for floors

Solvent-based acrylic sealer, suitable for the treatment of cement, concrete, terrazzo, natural stone, facing bricks or hard floors. Provides liquid and dust repellency, compacts cement and aggregate particles, increases mechanical resistance to abrasion and wear, and exhibits high chemical resistance to acids, alkalis, fats, and oils.

More information PDF disponible

Need technical advice?

Tell us about your project and we will recommend the most suitable product and dosage.

Contact