Waterproofing

Elasnet 2

Waterproof and elastic coating

A compound based on acrylic copolymers that is completely waterproof. Designed to solve waterproofing problems on roofs and terraces, as well as in numerous construction finishes. Its special formulation gives it high resistance to different types of aggressions (saline, fungi, etc.).

Download PDF datasheet Request information

Applications

  • Terraces, roofs, and planters
  • Chimneys, gutters, and broken uralite
  • Waterproofing finishes

Features

  • 01

    High resistance to saline attacks and fungi

  • 02

    Elasticity over 500 %

  • 03

    Total impermeability to water

  • 04

    Ideal for direct application on top

Directions for use

Apply a minimum of three crossed coats, preferably in different colors to avoid failures. Between coats, wait for the paint to be dry to the touch (approx. 3 h at 20 °C; drying time increases with lower temperatures and higher humidity). Recoatable after 24 h. Total curing in 15 days. QuimicaSur recommends reinforcing with Mallasnet on surfaces larger than 25 m², according to UNE 53-410-87. On old or cracked terraces and roofs, reinforcement is essential.

Technical data

Viscosity (Brookfield RVT at 20ºC). Poises. 600-800
Solid content % volume. 53
Water impermeability Total UNE 30701
Elongation at break > 500 % UNE 53413
Bending at −5 °C No cracks
Impact resistance Max height without perforation 500 mm UNE 53413
Determination of adhesion by direct tension (N/mm2) 1.8 UNE-EN 1542:1999
Accelerated aging. Unchanged EN 1062-11

Composition

Acrylic copolymers, fillers, pigments, and additives.

Safety

Do not paint in rain or threat of rain or with temperatures below 5 °C. Do not ingest.

  • S2 Keep out of reach of children.
  • S24/25 Avoid contact with eyes and skin.
  • S29 Do not dispose of waste in drains.
  • S51 Use in well-ventilated areas.

Category Waterproofing

Other related products

View the full range

Elasnet 1

Waterproof and elastic coating

A compound based on acrylic copolymers that is completely waterproof. Designed to solve waterproofing problems on roofs and terraces, as well as in numerous construction finishes. Especially suitable for terraces, planters, chimneys, gutters, and broken uralite.

More information PDF disponible

Elasnet Fibra

Waterproof and elastic coating reinforced with fibers

A compound based on acrylic copolymers that is completely waterproof and incorporates a fiberglass reinforcement. This reinforcement improves the cracking behavior at singular points: cracks, drains, half-rounds, and other vulnerable points.

More information PDF disponible

Sealpul 250

Waterproof polyurethane membrane

Elastic liquid-applied polyurethane membrane. Once applied, it creates a membrane that seals, protects, and waterproofs surfaces, providing long-lasting waterproofing as it cannot be dissolved in water. It has very high elasticity and is not affected by sunlight. It is used to achieve a perfect seal in contact with water and can be walked on after 24 hours.

More information PDF disponible

Sealpul 400

Walkable membrane resistant to UV rays

Single-component polyurethane, resistant to UV rays, highly elastic and walkable. It is used for the protection of waterproof membranes exposed to weather conditions.

More information PDF disponible

Technical resources

Articles related to this product

Resources

Resources

Waterproofing of walls: capillary, barrier or polymer — which method according to the pathology

Three families of solutions for three different pathologies: capillary moisture, pressure leaks, and joints in roofs. When to use each one and why they fail when mixed.

Need technical advice?

Tell us about your project and we will recommend the most suitable product and dosage.

Contact