Release Agents

Desmolnet M

Release agent for moldings

Product designed and formulated to prevent annoying adhesions in all types of molds intended for the creation of moldings on balconies, cornices, and decorative elements.

Download PDF datasheet Request information

Applications

  • Molds for moldings for balconies and cornices
  • Supports of plaster, expanded polystyrene, wood, polyester, and iron

Features

  • 01

    Does not produce adhesions or leave residues on the support

  • 02

    Applicable to plaster, expanded polystyrene, wood, polyester, iron molds, etc.

  • 03

    Perfect finishes without the need for touch-ups

Directions for use

It will be applied with a brush or roller, giving a uniform layer over the entire mold, allowing to dry for 30 to 60 minutes before filling with concrete. In the case of plaster molds, it is advisable to apply at each demolding; in others, it will withstand several demoldings. At temperatures above 30 °C, it may cause a magnifying effect and melt the 'porex' mold; apply in the shade and, once dry, put into work.

Technical data

Aspect Opaque liquid
Color White
Density 0.7 ± 0.5 g/cc
Solubility in water Insoluble
Active substance 100 %

Safety

Flammable. Do not ingest. Safety data sheet available to professional users upon request.

  • R10 Flammable.
  • S2 Keep out of reach of children.

Category Release Agents

Other related products

View the full range

Desmolnet

Water-dilutable concrete release agent

Release agent for concrete, water-dilutable, based on refined mineral oils, specially formulated to extend the lifespan of formwork sheets and boards. At the same time, it protects the sheets from oxidation.

More information PDF disponible

Desmolnet E

Concrete release agent

Fluid mineral oil with special additives that provide great lubricity and a high anti-rust power. Designed for application on all types of molds, whether wooden, metal, or PVC, achieving optimal releases. Due to its special formulation, it is also suitable for treating working rules.

More information PDF disponible

Technical resources

Articles related to this product

Resources

Resources

Release agents for site and precast: which to choose and why the finish matters

The differences between site release agents (in situ) and precast ones affect the finish, the durability of the mold, and the cost per m². Mineral oil, emulsion, synthetic ester, and reactive chemical.

Need technical advice?

Tell us about your project and we will recommend the most suitable product and dosage.

Contact